Filter
Top Products
23
DRIVING INSTRUCTIONS »
Check the following before each start
When you start, the motorcycle must be in perfect mechanical condition. For safety reasons,
you should make a habit of performing an overall check of your motorcycle before each start.
The following checks should be performed:
1 FUEL
Check the fuel quantity in the tanks.
2 CHAIN
Check the tension and condition of the chain.
A loose chain can fall off the sprockets and a worn-out chain can tear. In both cases this
can damage other motorcycle components and cause the motorcycle to go out of
control. A chain that is too tight or not greased will cause unnecessary wear to the chain
and sprockets.
3 TIRES
Check for damaged tires. Tires showing cuts or dents must be replaced. The tread depth
must comply with the legal regulations. Also check the air pressure. Insufficient tread
and incorrect air pressure deteriorate the driving performance.
4 BRAKES
Check correct functioning of the braking system. Check for sufficient brake fluid in the
reservoir. The reservoirs have been designed in such a way that brake fluid does not need
to be refilled even when the brake pads are worn. If the level of brake fluid falls below
the minimum value, this indicates a leak in the braking system or completely worn out
brake pads. Arrange for the braking system to be checked by a KTM specialist, as com-
plete failure of the braking system can be avoided.
Also check the state of the brake hose and the thickness of the brake linings.
Check free travel at hand brake lever and foot brake lever.