Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE »
ENGLISH
29
Checking the gear oil level
To check the gear oil level, first remove the plug [1]. With the motorcycle parked
in an upright position, a small quantity of oil should flow out of the indicator
opening [2]. If oil must be added, tilt the motorcycle and pour automatic gear
oil (Motorex ATF Super) into the bore.
LESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
THEREFORE, ONLY USE BRANDED PRODUCTS (MOTOREX ATF SUPER).
Changing gear oil *
The engine must be warmed up before changing the gear oil. Park the motor-
cycle on a horizontal surface, remove the oil drain plug [3] and drain the used
oil into an appropriate container. Clean the sealing surface, mount the oil drain
plug together with the gasket and tighten to 15 Nm.
Remove stopper [4] and fill in 0.15 liters of automatic gear oil (Motorex ATF
Super). Mount the stopper and check the engine for tightness.
LESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
THEREFORE, ONLY USE BRANDED PRODUCTS (MOTOREX ATF SUPER).
2
1
3
4