KTM 125 Motorcycle User Manual


 
ENGLISH
3
IMPORTANT WARRANTY AND
GUARANTEE INFORMATION
KTM sports motorcycles are designed and constructed to resist the usual
wear and tear of normal use in competitions.
The motorcycles comply with the regulations and categories currently in
effect with the leading international motorcycle associations.
Observance of the service, maintenance and tuning instructions for the
engine and chassis specified in the Owner's Manual is a prerequisite for
faultless operation and the avoidance of premature wear. An improperly
tuned chassis can lead to damage and breakage of the chassis components
(see chapter on checking the basic chassis setting).
The service work specified in the "Lubrication and Maintenance Schedule"
must be performed by a KTM workshop and recorded in the service manual
otherwise claims under the warranty shall become void.
The fuels and lubricants specified in the Owner's Manual or automotive
fluids with equivalent specifications must be used in accordance with the
maintenance schedule.
No claims can be filed under the warranty for damage or consequential
damage caused by manipulations or conversions to the motorcycle.
The use of the motorcycle under extreme conditions, e.g. on extremely
muddy and wet terrain, can lead to higher than average wear on
components such as the drive train or the brakes. In this case it may become
necessary to service or replace wear parts before the service limit specified in
the maintenance schedule has been reached.
THE SX/SXS AND MXC MODELS ARE PROHIBITED ON PUBLIC ROADS.
The EXC models are only allowed on public roads in the original
homologated (throttled) version. Without this performance restriction (i.e.
dethrottled), these models are only allowed to be driven off-road but not on
public roads. The EXC models are designed for off-road sports endurance
competitions(enduro) and not suitable for predominant motocross use.
In accordance with the international quality management
ISO 9001 standard, KTM uses quality assurance processes
that lead to the highest possible product quality.