Kodak C1505 Automobile Electronics User Manual


 
42 www.kodak.com/go/support
Appendix
Care and maintenance
If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
For digital camera disposal or recycling information, contact your local authorities.
In the US, go to the Electronics Industry Alliance site at www.eiae.org or Kodak at
www.kodak.com/go/support.
Upgrading your software and firmware
Download the latest versions of KODAK Software and the camera firmware (the
software that runs on the camera). Go to www.kodak.com/go/C1505downloads.
Storage capacities
The LCD displays the approximate number of pictures (or minutes/seconds of video)
remaining. For average SD Card capacities, go to www.kodak.com/go/SDcapacities.
Actual storage capacity varies depending on subject composition, card size, and other
factors. You may be able to store more or fewer pictures and videos.