Kinetik KIPS12-80 Automobile Battery Charger User Manual


 
GENERAL INFORMATION
Kinetik Intelligent 120 VAC to 12 VDC Power Converters are state-of-the-art
electronic converters / battery chargers. Their compact size and quiet operation
gives greater exibility in selecting the mounting locaiton for either OEM installa-
tion or after market replacement.
The Kinetik Intelligent Power Converters have a computer controlled charging
module built in. This is a microprocessor-controlled device which constantly
monitors the battery, and then automatically adjusts the converter output volt-
age based on its charge status. There are four (4) operating Modes (NORMAL,
BOOST, STORAGE and DESULFATION/EQUALIZE). Each mode is automati-
cally selected by the microprocessor and ensures a fast yet safe recharge for
your battery. See the chart below for details.
The chart below shows the amount of time it took a converter set to three differ-
ent output voltages to recharge a 125Ah (Amp Hour) battery after it was dis-
charged to 10.5 volts.