Kenwood DNX7360BT GPS Receiver User Manual


 
66 DNX series DNX7360BT/ DNX7360BTM
Audio Control
• FOCUS: Adjusts the vertical position of the
speaker and sound image by virtual
adjustment.
• TruBass: Assists the playback for the super bass
sound.
• SRS 3D: Makes a natural 3D sound field.
• Some items cannot be adjusted depending on
the selected speaker.
• SRS WOW control is not available in tuner source
and TV source.
• When Surround Control is Dolby Pro Logic II, SRS
WOW control is not available.
Surround Control (DDX8 series) Surround Control (DDX8 series)
You can set up the sound field.
1 Display the Surround Control screen
Touch [
] > > [ ] > > [Surround
Control]. (page 61)
2 Set the Surround Control
1
1
1
1 Sets a sound field.
You can select any of the following
sound fields.
"Bypass"/ "Bypass+Center"/ "Dolby
Pro Logic II Movie"/ "Dolby Pro Logic II
Music"/ "Dolby Pro Logic II Matrix"
[Stream Information] Displays the
present source information.
The stream (Dolby Digital, dts, Linear
PCM, MPEG, SDDS, AAC or MP3/WMA),
input channels (front or rear channels),
and sampling frequency are displayed.
• When you have selected the TV or TUNER source
and when you set the Dolby PL, we recommend
you to select the "Dolby PLII Matrix" mode. If you
select another Dolby PLII mode, the sound is
NOT output from rear speakers when you receive
monaural broadcasting sounds.
• Surround control can be set for each source.
Dolby Pro Logic II Music Adjustment
1 Display the Dolby Pro Logic II Music
Adjust screen
2 Adjust the sound field
[Dimension Control] Sets the surround
position by adjusting the front and rear
volume balance.
[Center Width Control] Sets the vocal
image position by adjusting the right
and left vocal volume level.
[Panorama Mode] Turns the Panorama
mode On or Off.
• You cannot use the <Surround Control
Adjustment> during playback of a Multi-channel
source.