Kenwood DNX719VHD GPS Receiver User Manual


 
9
DNX719VHD
Number Name Motion
9
Remote
Sensor
Receives the remote control signal.
10
AUDIO Displays the Tone Control screen (Instruction Manual P.89).*
11
USB Switches to the USB or iPod sources. (Instruction Manual P.77)
12
DISC Switches to the disc media sources.
13
TUNER Switches to the Tuner sources.
14
Release key Detaches the part of front panel.
15
Disc insert
slot
A slot to insert a disc media.
16
SI indicator If the SI function is turned on, this indicator flashes when the panel is
detached (Instruction Manual P.78).
* The display may not switch to the Tone Control screen in some conditions.
How to insert a MicroSD card
1) Open the
8
microSD card slot cover as the
illustration in the right.
2) Hold the microSD card with the pins facing
left and the notched section down, and
insert it into the slot until it clicks.
To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.
Pins side
DNX719VHD_QSG_K_en.indd 9 12/10/09 20:28