Filter
Top Products
6 ñ English
First Step
Various setup screens appear automatically before
using.
ÑInitial setup
When you rst turn on the unit, the screen of the
conguration setting will appear.
1 Turn the ignition key of your car to ACC.
The unit is turned on.
Initial SETUP screen appears.
2 Touch the corresponding key and set the
value.
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline
unit are set.
After setting, touch [Enter].
Language
Select the language used for the control screen
and setting items. Default is “American English (en)”.
(Instruction Manual P.95)
After setting, touch [Enter].
Angle
DNX8
DNX7
Adjust the position of the monitor. Default is “0”.
(Instruction Manual P.98)
After setting, touch [6].
Color
Set the screen and button illumination color. You
can select whether to perform color scan and adjust
scanning color. (Instruction Manual P.99)
After setting, touch [6].
EXT SW (DNX891HD, DNX7710BT only)
Control the external devices. (Instruction Manual
P.104)
After setting, touch [6].
Camera
Set the parameters for the camera. (Instruction
Manual P.102)
After setting, touch [6].
OEM SETUP (North America Sales area only)
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
3 Touch [Finish].
✎ NOTE
• “Initial setup”also appears when the unit is reset.
LVT2547-001C_14DNX_QSG_K_En.indd 6 14/02/04 15:21