Filter
Top Products
6
Quick Start Guide
First Step
Power on the unit and perform some
setup steps before using.
Press the <MENU> button.
The unit is turned on.
The “Initial setup” is only necessary
when you use the unit for the first
time after purchase, and when you
reset the unit.
1
Touch the corresponding
key and set the value.
Language
Select the language used for the control
screen and setting items. Default is “American
English (en)”. (Instruction Manual P.89)
After setting, touch [Enter].
Angle
Adjust the position of the monitor. Default is
“0”. (Instruction Manual P.92)
After setting, touch [
].
iPod AV Interface Use
Set the terminal which your iPod is connected
to. Default is “iPod”. (Instruction Manual P.98)
Color
Set the screen and button illumination color.
You can select whether to perform color scan
and adjust scanning color. (Instruction Manual
P.92)
After setting, touch [
].
EXT SW
Control the external devices. (Instruction
Manual P.99)
After setting, touch [
].
Camera
Set the parameters for the camera. (Instruction
Manual P.96)
After setting, touch [
].
B59-2176-00_00_13DNX_QSG_K_En.indd 6 12/12/03 10:18