Kenwood DNR8015BT GPS Receiver User Manual


 
8 ñ English
Types of accounts
Administrator
As Administrator, you can create an owner account
and perform initial setup.
You can log in to the system if you have not created
an owner account.
Guest
An account for guests such as your friends.
The guest can operate this unit, but cannot use the
functions related to mail, social media, and Route
Collector site.
Owner
The account for the person who manages this unit.
The owner can use the functions related to mail,
social media, and Route Collector site.
You can register users such as your family.
User
The account for the user of this unit.
The user can use the functions related to mail, social
media, and Route Collector site.
You can register up to 4 user accounts.
Create User Account
Preparation
• To register yourself in the Route Collector site as a
user, you need a mail address.
• You can register yourself via the Web.
http://www.route-collector.com/
• This step may be skipped if you have already
registered yourself in the Route Collector site.
1) Touch [Create Account].
2) Enter account information.
You cannot register an account which has
already been used. Register another account
name.
3) Touch [OK].
The account is temporarily registered in the
Route Collector site.
4) Activate the account.
A confirmation mail is sent to the registered mail
address. Open the indicated URL to complete
account registration.
Set Owner Account
1) Touch [Set Owner Account].
2) Enter account information.
Enter the information registered in the Route
Collector site.
3) Touch [OK].
3 Touch [Next].
4 Touch the corresponding key and set the
item.
Locale (DNN9150BT/ DNN9150BTM)
Select the country for the navigation system.
The language, the distance unit, and the gasoline
unit are set.
Language
Select the language used for the control screen and
setting items. Default is “American English (en)”.
After setting, touch [Enter].
Angle
Adjust the position of the monitor. Default is “0”.
After setting, touch [
].
Color
Set the screen and button illumination color. You
can select whether to perform color scan and adjust
scanning color.
After setting, touch [
].
Camera
Set the parameters for the camera.
After setting, touch [
].
DEMO
Set the demonstration mode. Default is “ON”.