Filter
Top Products
66 DNX series DNX9960/ DNX7160/ DNX7020EX
Hands Free Unit Control
[Call Beep] Sets the beep of the
incoming call. ( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of
the incoming SMS. (
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether
to use cell-phone phonebook, outgoing
calls list, incoming calls list and missed
calls list. (
"ON")
"ON": Yes.
"OFF": No.
[SMS Use] Sets the SMS function.
(
"ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select
phone number category with voice
recognition. See <Key Word Voice
Registration> (page 67). (DNX7/ DDX8
series only)
[Echo Cancel Level] Adjust the level of
echo cancellation. (
"15")
[Microphone Level] Adjusts the
sensitivity of the microphone for a
telephone call. (
"2")
[Noise Reduction Level] Reduce the
noises generated by surrounding
environment without changing the
microphone volume. Adjust the voice of
caller when it is not clear. (
"15")
[Restore] Restores the Hands Free
SETUP value to the initial value.
⁄
• Either the time interval for automatic answer set
on this unit or the time interval set on the cell-
phone, whichever is shorter, takes effect.
Voice Registration Voice Registration
(DNX7/ DDX8 series)(DNX7/ DDX8 series)
Registers voice for voice recognition
in Phonebook. Up to 35 voices can be
recorded in one cell-phone.
1 Display the Phonebook Detail screen
Go through the procedure of <Calling by
Phonebook> (page 61).
2 Display the voice registration screen
[Record] Registers the voice for voice
recognition to the selected Phonebook.
If there are already 35 voice tag
registered in the same cell-phone,
[Record] button is deactivated.
[Play] Plays the voice registered in the
selected Phonebook data.
[Delete] Deletes the voice registered in
the selected Phonebook data.
Touch to display the confirmation
screen. Touch [Yes] to delete or [No] to
cancel.
3 Say the name to register (1st try)
Say within 2 seconds after the Beep.