Kenwood DDX8022BT GPS Receiver User Manual


 
4
|
DNX8220BT/DDX8022BT
Connection
PRK SW
ILLUMI
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Battery wire (Yellow)
Ground wire (Black)
Ignition wire (Red)
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
Power control/ Motor antenna control wire
(Blue/White)
Dimmer control wire (Orange/White)(Orange/White)
Antenna Cord
FM/AM antenna
input (JASO)
If no connections are made, do not let the cable come out from the tab.
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
External amplifier control wire (Pink/Black)
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
Mute wire (Brown)
To connect the Kenwood navigation system,
consult your navigation manual.
Parking sensor wire (Light Green)
Connect to the vehicle's parking brake
detection switch harness.
For the sake of safety, be sure to connect the parking sensor.
Steering remote control input
(Light Blue/Yellow)
To steering remote
Reveres sensor wire (Purple/White)
Connect to vehicle's reverse lamp harness when
using the optional rear view camera.
Connector A
Connector B
To use the steering wheel remote control feature, you need to an
exclusive remote adapter (not supplied) matches your car is required.
When this terminal is not in use, leave its cap on.