Filter
Top Products
English
|
9
1. Attach accessory 5 to the unit.
Installing the Microphone Unit
(DNX6140/DNX6000EX/DDX5034BT only)
Installing the Escutcheon
Accessory 5
1. Check the installation position of the microphone
(accessory 9).
2. Remove oil and other dirt from the installation
surface.
3. Install the microphone.
4. Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Accessory 9
Peel the release coated paper of double-face adhesive tape
to fix on the place shown above.
Adjust the direction of the microphone to the driver.
Install the microphone as far as possible
from the cell-phone.