Filter
Top Products
OPERATING SPECIFICATIONS
ENGINE
Make/Model/Fuel Type Cummins/B5.9-C/Diesel
Type 4-cycle, watercooled, turbocharged
after-cooled, direct injection
Net flywheel horsepower 160 HP/2400 RPM
Max Torque 490 lb/ft. @ 1500 RPM
Number of cylinders 6
Bore and stroke 4.02" x 4.72" (102mm x 120mm)
Total displacement 359 in
3
(5883 cm
3
)
Alternator AC24V–1.68kw (65amp)
Starting motor 24V–7.8kw (4 HP)
Battery 12V–150AH, 2 units
Governor All-speed, mechanical type
TORQUE CONVERTER AND TRANSMISSION
Torque converter 3 elements, single stage
Torque stall ratio 3.65:1
Main clutches Wet hydraulic, multi-disk type
Cooling method Forced circulation type
Transmission Full power shift, 4 forward, 4 reverse with
automatic mode (2nd - 4th) with downshift
switch for 2nd - 1st downshifting
Forward 1st: 4.7 MPH (7.5 km/hr)
2nd: 7.8 MPH (12.5 km/hr)
3rd: 12.7 MPH (20.5 km/hr)
3rd: 23.0 MPH (37.0 km/hr)
Speeds
Reverse 1st: 4.7 MPH (7.5 km/hr)
2nd: 7.8 MPH (12.5 km/hr)
3rd: 12.7 MPH (20.5 km/hr)
3rd: 23.0 MPH (37.0 km/hr)
SERVICE REFILL CAPACITY
LOCATION CAPACITY: Gallons Liters
Engine (coolant) 14.3 (54.0)
Fuel tank (diesel fuel) 58.1 (220.0)
Engine (oil pan) 5.8 (22.0)
Front axle (gear oil) 12.7 (48.0)
Rear axle (gear oil) 13.5 (51.0)
Steering box 0.4 (1.5)
Torque converter and 7.9 (30.0)
transmission (engine oil)
Hydraulic system including 35.7 (135.0)
tank (hydraulic oil)
Brake oil tank (engine oil) 1.3 (4.9)
HYDRAULIC AND STEERING SYSTEM
Steering type Articulated frame steering
Steering mechanism Hydraulic power steering unit,
mechanical follow up
Lift (boom) cylinder Two (2) double-acting piston type:
5.5" x 29.7" (140mm x 754mm)
Tilt (bucket) cylinder One (1) double-acting piston type:
6.3" x 19.8" (160mm x 502mm)
Steering cylinder Two (2) double-acting piston type:
3.1" x 15.0" (80mm x 380mm)
Main oil pump Gear type: 15.9 GPM @ 1800 RPM
(60 LPM @ 1800 RPM)
Steering oil pump Gear type: 37.8 GPM @ 1800 RPM
(143 LPM @ 1800 RPM)
Pilot oil pump Gear type: 10.6 GPM @ 1800 RPM
(40 LPM @ 1800 RPM)
Relief valve Loading 3000 psi (210 kg/cm
2
)
set pressure Steering 3000 psi (210 kg/cm
2
)
HYDRAULIC CYCLE TIME*
Lifting time (at full load) 6.2 sec.
Lowering time (empty) 3.1 sec.
Bucket dumping time 1.2 sec.
TOTAL 10.5 sec.
* Measured in accordance with SAE J732C
AXLE SYSTEM
Drive system 4-wheel drive
Front and rear axle Full floating banjo type
Tires Standard 20.5 x 25-12PR (L-2)
Optional 20.5 x 25-12PR (L-3)
23.5 x 25-12PR (L-2)
Reduction and Spiral bevel/gear, 1 stage reduction torque,
differential gear proportioning type
Final reduction gear Outboard mounted. Internal planetary gear
Oscillation angle ±12° (total 24°)
BRAKE SYSTEM
Service brakes 4 wheel air over hydraulic wet disc brake.
Dual circuit.
Parking/Emergency brake Spring applied air released type.
Meets MSHA requirements.