John Deere PC20235 GPS Receiver User Manual


 
Installation Instructions
OUO6050,0000501 –19–16DEC03–6/11
N64462 –UN–18DEC03
A—TCM Cap
B—Radio Harness
C—Harness
D—Receiver
E—Bracket
F—Screws (2 Used)
IMPORTANT: If base station does not have a TCM, a
cap is required on TCM connector on
harness or STARFIRE will not function.
NOTE: RTK Vehicles REQUIRE a TCM.
Base stations DO NOT REQUIRE a TCM.
9. Receivers without TCM: Connect RTK harness to
TCM cap (A) and position section of harness in upper
receiver shroud as shown.
10. Position radio harness (B) in upper receiver shroud as
shown.
11. Position harness (C) as shown.
12. Attach receiver (D) and bracket (E) with screws (F).
OUO6050,0000501 –19–16DEC03–7/11
N64451 –UN–16DEC03
A—RTK Harness
B—TCM
13. Receivers with TCM:Connect RTK harness (A) to
TCM (B).
PC20235 (18DEC03)
6
Installation Instructions
121803
PN=8
Continued on next page