Filter
Top Products
Emergency Disarm Procedure
If your remote control is lost or fails to function, use this procedure to
disarm the F30/F35 and start your vehicle.
1.Use the keys to enter the vehicle.
The alarm will sound once the door is opened.
2.Insert the key into the ignition and turn to the ON position.
3.Locate and press the emergency override button.
The alarm will turn off and then you will be able to
start your vehicle.
Your Emergency Disarm Button is located:
Installer Programmed Options
10
Note: The following section describes programming options
without using a remote transmitter. This programming method
can be used for all options programming with the exception of
IT-s
TM
sensor sensitivity adjustments. When adjusting the IT-s
TM
sensor a programmed remote must be used.
Alternative Method for Programming Selectable Option’s
1. Open the driver’s door.
2. Turn vehicle ignition on.
3. Press and hold emergency override button. After 15 seconds,
the horn will chirp three (3) times. This indicates that the unit has
entered the transmitter programming mode.
4. Release, then press and release the button, again. The horn will
chirp (4) times indicating the the unit has entered the programming
options mode.
5. Press vehicle’s lock switch to advance to the next feature. The
siren or horn will sound a number of times to indicate the number
of the option.
6. Press vehicle’s unlock switch to turn the option on or off. The
vehicle. The vehicle status indicator on the dashboard indicates
whether an option is on or off.
• If the selected option is ON, the indicator will light.
• If the selected option is OFF, the indicator will turn off.
• The status indicator will turn on or off when an option is changed.
Programming Selectable Options, cont’d
7