Filter
Top Products
4
RELEASE YOUR JABRA
GB
F
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
5
Jabra A120s Bluetooth music adaptor
GB
F
ES
PT
DE
IT
NL
SU
NO
SE
DK
GR
4. Your Jabra A120s will find and connect to the headset
• Within 1 minute the headset LED will start to flash and the adaptor will start
to flash slowly. Press play on your audio device and you will hear sound
through your headset.
If the headset LED is still solid blue after 1 minute repeat sections 2 and 3.
8. Using the Jabra A120s
Start playing music
• Make sure that your headset is turned on before turning on the music
adaptor. The music adaptor will then connect automatically to your headset.
Pause (Mute) music
•
Tap the button on the music adaptor or use your headset’s play/pause button.
• Repeat the above to resume the music playing in the headset.
If you lose the connection between the Jabra A120s and your headset:
• Tap the button on the music adaptor. (Make sure that the headset is
switched on.)
9. What the lights mean
What you see Status
Solid red Charging
Flashing red Low battery
Solid green Fully charged
Solid blue Pairing mode
Soft flashing blue (every 3 sec) Streaming connection is established
Flashing rapidly blue Searching for devices
10. Troubleshooting and FAQ
Please see the headset’s manual for further information regarding the
headset.
I hear crackling noises
Bluetooth is a radio technology which means it is sensitive to objects
between the headset and the connected device. It is designed for the
headset and the connected device to be used within 10 metres of each
other, when there are no major objects in the way (walls, etc.).
I cannot hear anything in the headset
Increase the volume in the headset and on the music player. Ensure that the
headset is paired to a device that is playing. Make sure that music is playing
on the audio device.
I have pairing problems
Ensure that both devices are fully charged and repeat the pairing process.
4. Getting started
The Jabra A120s is easy to operate. The multi-function button performs
different functions depending on how long you press them:
Instruction: Duration of press:
Tap Press briefly and let go
Press Approx: 1 second
Press and hold Approx: 5 seconds
5. Charging your Jabra A120s
Make sure that your Jabra A120s is fully charged for 2 hours before you start
using it. Use only the chargers provided in the box or Jabra approved chargers
such as the Jabra BT620s AC charger – do not use chargers from any other
devices as this might damage your Jabra A120s.
When the indicator light is solid red, your music adaptor is charging. When the
light turns to green, the adaptor is fully charged.
6. Turning on your Jabra A120s
• Press the multi-function button to turn On your Jabra A120s – when the
device is On the light indicator (LED) will flash blue
• Press and hold the button to turn the device Off (until the light turns off)
Note: Once you have paired your device with the Jabra A120s, it will
automatically connect to the device each time you turn on the Jabra A120s.
7. Pairing
3
with a headset or other device
Before you use your Jabra A120s you must pair it with a Bluetooth
headset or headphone.
• Make sure the headset and the Jabra A120s are turned off
1. Put the headset or headphone into pairing mode:
Refer to your headset’s manual for pairing instructions.
If you are pairing with Jabra BT620s:
Make sure the Jabra BT620s is off. Press and hold the Answer/End button until
the indicator light is solid blue.
2. Connect your Jabra A120s to your audio device via the jack connection
3. Put your Jabra A120s in pairing mode
• Make sure that the Jabra A120s is turned off
• Turn on your Jabra A120s. The adaptor will automatically search and pair
with the headset.