Filter
Top Products
PACKAGE CONTENTS
• Mobile Battery Pack
• Micro USB Charging Cable
• Quick Setup Guide
CHARGING THE MOBILE BATTERY
1 Plug the small end of the USB cable into the mobile battery’s
microUSB port (input).
2 Plug the large end of the included USB cable into a standard USB
port on your computer, vehicle charger, or wall charger (not
included).
The mobile battery automatically begins charging.
CHARGING YOUR ELECTRONIC DEVICE
1 Plug the large end of the USB cable into one of the mobile
battery’s USB ports (output).
2 Plug the small end of the USB cable into your device.
The mobile battery automatically begins charging your
device.
Notes:
• You can use both outputs to charge your devices at the
same time. The total maximum output is 2A.
• If your device requires a dierent connector than the one
provided, use the cable that came with your device
CHECKING YOUR BATTERY LEVEL
• • • • 4 LEDs = 75-100% power
• • • • 3 LEDs = 50-75% power
• • • • 2 LEDs = 25-50% power
• • • • 1 LED = 0-25% power
LEDs
Before using your new product,
please read these instructions to prevent any damage.
USB (output)
Quick Setup Guide
|
NS-MB5000-C
Mobile Battery Pack
Micro USB (input)
NS-MB5000-C_14-0691_QSG_V2.ai 1 6/26/2014 1:16:35 PMNS-MB5000-C_14-0691_QSG_V2.ai 1 6/26/2014 1:16:35 PM