Filter
Top Products
Section B - Getting Started
This section explains how to get started using
the Apollo handheld GPS receiver.
Information in this section explains how to:
understand the keys on the keypad
enter a destination waypoint
navigate to a destination
save your present position in memory
create user waypoints
use the navigation simulator
The Apollo handheld GPS receiver is easy to
use. Install the batteries included or connect
the receiver to an external power source. Then,
spend a few minutes to read the instructions in
this section and you will be on your way to
navigating with precise accuracy.
Switching
the GPS
Receiver
On and Off
To switch the
receiver on, press
the MENU/PWR
key.
To switch the
receiver off, press
and hold the
MENU/PWR key.
B
1