Filter
Top Products
5. Scan the RS 232 interface bar code below. This
programs the development engine for an RS 232
interface at 115,200 baud, parity–none, 8 data
bits, 1 stop bit, and adds a CR LF suffix.
User Documentation
Refer to www.honeywellaidc.com for detailed user
documentation about installing and configuring image
engines.
Technical Assistance
Contact information for technical support, product
service, and repair can be found at
www.honeywellaidc.com.
Patents
For patent information, please refer to
www.honeywellaidc.com/patents.
RS-232 Interface
Limited Warranty
Refer to www.honeywellaidc.com/
warranty_information for your product’s warranty
information.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to
make changes in specifications and other information
contained in this document without prior notice, and the
reader should in all cases consult HII to determine whether
any such changes have been made. The information in this
publication does not represent a commitment on the part of
HII.
HII shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing,
performance, or use of this material.
This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of
this document may be photocopied, reproduced, or
translated into another language without the prior written
consent of HII.
Web Address: www.honeywellaidc.com
©2011 Honeywell International Inc. All rights reserved.