HoMedics RMM-300H-3GB Automobile Accessories User Manual


 
Removable Flap
Remove for a more
intense back massage.
(
Not pictured)
Moving Dual
massage mechanism
54
GB
GB
Rolling Massage
R
olling is like two hands or thumbs working up
a
nd down along your spine
Rolling Programs
Choose from 3 preset programs where the
R
olling massage travels up and down in a
s
pecific area of the back. To select a program,
simply press the button and the LED will
illuminate. To deselect, press the button again or
press another button.
Partial
While the Rolling massage is moving at the area
of the back you want to focus on, press either
button. The massage heads will move up and
down only in that particular area of the back.
Press arrows to adjust the massage action up or
down.
Width Adjustment
While the unit is in Rolling massage, press this
button to adjust the distance or width between
the massage heads. This adjustment changes
the area that is massaged along your spine. With
each press, the massage heads will move to the
next available position.
Heat
For soothing heat when massage is on, simply
press the heat button and the corresponding red
L.E.D. light will illuminate. To deselect, press the
button again and the corresponding L.E.D. light
will turn off. For your safety, heat cannot be
turned on if no massage program is selected.
Demo Button
F
or a demonstration of the features of the portable
m
assage mat, press the Demo button. The unit will
b
riefly go through each function. Once complete, the
unit automatically turns off. The corresponding L.E.D.
light will blink to indicate the active functions.
Shiatsu Massage
Shiatsu is a deep kneading circular massage.
Shiatsu Programs
Choose from 3 preset programs where the Shiatsu
massage travels up and down in a specific area of the
back. To select a program, simply press the button and
the L.E.D will illuminate. To deselect, press the button
again or press another button.
Spot Shiatsu
While the unit is in Shiatsu massage, press either button
to stop and focus the Shiatsu action in one place.
Once the unit is operating in Spot Shiatsu, you may
adjust the mechanism position by holding down either
button until the desired position is reached. The Up
Arrow will move the mechanism upwards and the Down
Arrow will move it down. Once you release the button,
the mechanism will stop in that place.
Power Button
To turn on the massage functions, first press the
Power button. The L.E.D indicator will illuminate
and confirm your selection. To turn off the
massage functions, simply press the button again.
The L.E.D. indicator will blink while the massage
mechanism returns to its highest point and then it will
turn off.
NOTE: There is a 15-minute auto shut off on the
unit for your safety.
NOTE: The massage mechanism always “parks”
or finishes in its highest position.
It will continue to this position after the power
has been turned off. If the electrical supply is
interrupted, when power is restored, the
mechanism will “park” or move to its highest
position.
Caution: Do Not use Spot Shiatsu with heat for the
back in one area for more than 3 minutes.
PRODUCT FEATURES: