Filter
Top Products
CONC
ON
upwards and the Down Arrow will move it down. Once you release the button, the mechanism will stop in that place.
Heat- For soothing heat when massage is on, simply press the heat button and the corresponding red LED light will
illuminate. To deselect, press the button again and the corresponding LED light will turn off. Heat is available in both the
back & shoulder areas, which are controlled separately. For your safety, heat cannot be turned on if the corresponding
massage program is not on.
Rolling Programs for the Back - Choose from 3 preset programs where the Rolling massage travels up and down in a
specific area of the back. To select a program, simply press the button and the LED will illuminate. To deselect, press the
button again or press another button.
NOTE: There is a 15-minute auto shut off on the unit for your safety.
NOTE: The moving dual massage mechanism on the back always “parks” or finishes in its lowest position. It will continue
to this position after the power has been turned off. If the electrical supply is interrupted, when power is restored, the
mechanism will “park” or move to its lowest position.
Width Adjustment- While the unit is in Rolling massage for the back, press this button to adjust the distance or width
between the massage heads. With each press, the massage heads will move to the next available position.
Vibration Massage - Add invigorating vibration massage to any shiatsu or rolling massage program.
Heat- For soothing heat when massage is on, simply press the heat button and the corresponding red LED light will
illuminate. To deselect, press the button again and the corresponding LED light will turn off. Heat is available in both the
back & shoulder areas, which are controlled separately. For your safety, heat cannot be turned on if the corresponding
massage program is not on.
Power Button - To turn on the unit, first press the POWER button. The LED indicator will illuminate and confirm your
selection. To turn off the unit, simply press the button again. The LED indicator will blink while the back massage
mechanism returns to its lowest point and then it will turn off.
Demo Button - For a brief demonstration of the features
of the Shiatsu One Massage Cushion, press the Demo
button. The unit will briefly go through each function.
Once complete, the unit automatically turns off. The
L.E.D. light will blink to indicate the active functions.
You may adjust the massage position in the shoulder
area by holding down either the Up or Down button till
the desired position is reached.
Vibration Massage - Add invigorating vibration
massage to any shiatsu or rolling massage program.
Shoulder Massage - To turn on the massage in the
shoulders, simply press the Shoulder button and the
LED light will illuminate. To deselect, press the button
again.
NOTE: By pressing up/down arrows, when in use, you
can adjust the shoulder massage mechanism position to
your personal comfort level.
Shoulder Position Adjustment - Once the shoulder
massage function is on, you may adjust the massage
position in the shoulder area by holding down either
arrow button until the desired position is reached. The
Up Arrow will move the mechanism up and the Down
Arrow will move it down. Once you release the button,
the mechanism will stop in that place.
Shiatsu Massage - Shiatsu is a deep kneading
circular massage.
Shiatsu Programs for the Back - Choose from 3
preset programs where the Shiatsu massage travels
up and down in a specific area of the back. To select a
program, simply press the button and the LED will illuminate. To
deselect, press the button again or press another button.
Spot Shiatsu for the Back - While the unit is in Shiatsu massage for the back,
press either button to stop and focus the Shiatsu action in one place. Once the unit
is operating in Spot Shiatsu, you may adjust the mechanism position by holding down
either button until the desired position is reached. The Up Arrow will move the mechanism
8
9
Deluxe Shiatsu Massaging Cushion
Shoulder and Back Massage Mechanism