HoMedics MCS-350H Automobile Accessories User Manual


 
+
Shiatsu Massaging Cushion
Moving Dual Massage Mechanism
NOTE: The moving
Shiatsu massage
mechanism always
“parks” or finishes in
its lowest position. It
will continue to this
position after the
power has been turned
off. If the electrical
supply is interrupted,
when power is
restored, the
mechanism will “park”
or move to its lowest
position.
Demo Button
For a brief demonstration of the features of the Shiatsu
+
Massaging Cushion, press the Demo button. The unit will
briefly go through each function. Once complete, the unit
automatically turns off. The L.E.D. light will blink to indicate
the active functions.
Rolling Massage
Rolling is like two hands or thumbs working up and down
your back.
Rolling Programs
Choose from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back. To select
a program, simply press the button and the LED will
illuminate. To deselect, press the button again or press
another button.
Width Adjustment
While the unit is in Rolling massage, press this button to
adjust the distance or width between the massage heads.
With each press, the massage heads will move to the next
available position.
Heat
For soothing heat when massage is on, simply press
the heat button and the corresponding red L.E.D. light
will illuminate. To deselect, press the button again and
the corresponding L.E.D. light will turn off. For your safety,
heat cannot be turned on if no massage program is
selected.
NOTE: There is a 15-minute auto shut off
on the unit for your safety.
Power Button
To turn on the massage
functions, first press the
POWER button. The L.E.D.
indicator will illuminate and
confirm your selection. To
turn off the massage
functions, simply press the
button again. The L.E.D.
indicator will blink while
the dual massage
mechanism returns to its
lowest point and then it will
turn off.
Shiatsu Massage
Shiatsu is a deep kneading
circular massage
Shiatsu Programs
Choose from 3 preset
programs where the Shiatsu
massage travels up and down
in a specific area of the back.
To select a program, simply
press the button and the L.E.D.
will illuminate. To deselect,
press the button again or press
another button.
Spot Shiatsu
While the unit is in Shiatsu
massage, press either button to
stop and focus the Shiatsu
action in one place. Once the
unit is operating in Spot
Shiatsu, you may adjust the
mechanism position by
holding down either button
until the desired position is
reached. The Up Arrow will
move the mechanism upwards
and the Down Arrow will move
it down. Once you release the
button, the mechanism will
stop in that place.
Moving dual
massage mechanism
8
The actual product materials and fabrics
may vary from the picture shown.
9