Filter
Top Products
7
On/Off
Before connecting power
source, be sure the controls are
in the far left position. Select L
or H to activate the massage
and select a zone to begin the
massage function. To choose
the intensity of your massage,
adjust the strength from L to H.
To turn the power off, slide the
switch to the far left position;
the LED light will turn off.
Heat
Soothing, penetrating heat is
activated by pressing this
button. To turn off heat, simply
press the button again. The
glowing L.E.D. light indicates
that heat is on.
PLEASE NOTE: The heat
option will only work while a
massage feature is selected.
NOTE: When selecting
the heat feature with
massaging action, there
will be a slight decrease
in the strength of the
massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
6
Pressure
Activated
Switch
Soothing
Heat
8 Massage
Motors
Targeted
Massage Buttons
Zone buttons activate
motors to massage specific
areas: upper back, middle
back, lower back and seat.
Customize your massage
by choosing one specific
area, any combination of
areas, or all four at once. To
select a massage area,
simply slide the button to
the right and the
corresponding L.E.D. light
will illuminate. To deselect,
simply slide the button to
the far left and the
corresponding L.E.D. light
will turn off.
Power Adaptors
This massager is powered
by a custom 120 volt AC
home adaptor, and 12 volt
DC auto adaptor (cigarette
lighter plug-in style). Both
are included with your unit.
8 Motor Back Massager
NOTE: Replacement parts are available online at homedics.com