Filter
Top Products
7
On/Off
Before connecting power
source, be sure the controls are
in the far left position. Select L
or H to activate the massage
and select a zone to begin the
massage function. To choose
the intensity of your massage,
adjust the strength from L to H.
To turn the power off, slide the
switch to the far left position,
the LED light will turn off.
Heat
Soothing heat is activated by
pressing this button. To turn off
heat, simply press the button
again. The glowing L.E.D. light
indicates that heat is on.
PLEASE NOTE: The heat
option will only work while a
massage feature is selected.
NOTE: When selecting
the heat feature with
massaging action, there
will be a slight decrease
in the strength of the
massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
6
Pressure
Activated
Switch
Soothing
Heat
5 Massage
Motors
Massage Buttons
Zone buttons activate
motors to massage specific
areas: upper back, lower
back and seat. Customize
your massage by choosing
one specific area, any
combination of areas, or all
three at once. To select a
massage area, simply slide
the button to the right and
the corresponding L.E.D.
light will illuminate. To
deselect, simply slide the
button to the far left and the
corresponding L.E.D. light
will turn off.
Power Adaptors
This massager is powered
by a custom 120 volt AC
home adaptor, and 12 volt
DC auto adaptor (cigarette
lighter plug-in style). Both
are included with your unit.
5 Motor Back Massager