Filter
Top Products
18
GPSmile52
Stylus Adjustment
Control of the unit is accomplished primarily through the stylus by
touching/writing on the screen. If the system cannot correctly identify your
stylus’ input, please run through the screen calibration procedure.
1. From the settings window, select [Stylus Adjustment] to start the
screen calibration procedure.
2. Use the stylus and touch the
cross at the center of the
screen once.
3. Touch the cross in the
second position once.
4. Touch the cross in the third
position once.
5. Continue the calibration by
touching the cross in the
positions that follow
6. To finish the calibration procedure, press the Enter key to accept the
new settings.
7. Press the Esc key to keep the old settings.
8. Select to go back to the main menu screen.