Filter
Top Products
-23-
GPSmile51
[Stylus Adjustment]
Control of this unit is accomplished primarily through the stylus by
touching/writing on the screen. If the system cannot correctly identify
your stylus’ input, please run through the screen calibration procedure.
1. From the settings window, select [Stylus Adjustment] option to
start the screen calibration procedure.
2. Use the stylus and touch once on the cross that’s displayed in the
center of the screen.
3. Touch once on the cross at the second position.
4. Touch once on the cross at the third position.
5. Follow the procedures and finish touching on the forth and fifth
positions.