Filter
Top Products
Using Vehicle Bracket
The included in vehicle bracket set can be securely suctioned on the front
windshield, or using the adhesive plate, securing on top of the glove
compartment. This device will effectively secure the GPS unit in the vehicle.
Follow the procedures below to secure the
bracket:
1. Follow the arrows and slide the unit into
the in-vehicle bracket fitting holes to
secure.
2. Gently push down until the unit is tightly
fixed with the bracket.
3. Bend the bracket support to a proper angle.
Suction the vehicle bracket securely to the
windshield, ensuring its base is resting firmly
on the dashboard.
Note: Please note the directions
of the arrows, when fitted the
assembly should be tight. If these
directions are not followed, a
loose fit will result, and
components must be
reassembled.