Filter
Top Products
Hollywood Racks
F10 Elevator Rack Instructions
When using your Elevator Rack, always remember the following points:
Install this rack on structurally sound boot lids and/or bumpers only.
Never install upper hooks to plastic, glass or fiberglass.
Clean surface of the boot lid and bumper prior to installation.
Tighten all straps both before and after placing bikes on the rack.
Never place more than 45kg / 100 lbs. on the Elevator Racks.
Use at least 2 tie-down straps or shock (bungee) cords for each bike when securing bikes
to rack.
Keep bicycle tires at least 30cm away from the exhaust pipe of the vehicle.
Check the rack, bikes and strap tension regularly during use.
Drive slowly when on bumpy or dirt roads.
safety strap
1