Filter
Top Products
Item #4 & #13
Place (2) Diamond Plate Floors
between Bench/Wall assemblies and
Front bulkhead. Place cardboard
along side of bench while positioning
Be careful that exposed wires are not touching metal and optional KK-
x-VAK hoses are not completely crushed
Note: Vent hose will be tight in spots. If hose are crushed to an oval
shape the airflow will still be good. Avoid completely crushing hoses.
the
f
loor to avoid scratchin
g
the bench.
KK-XXX-05_INST_8-07
11
Current view of installation
Place Center Divider into
vehicle.
Item #5
Item #4
Item #3
Approximate center
Item #5
Carefully place Driver-side
Ceiling section into vehicle.
Item #7
Loosely bolt Center Divider to
Front Bulkhead
Item #5 to #3
The floor(s) will square the benches
and bulkheads to the kit.