Filter
Top Products
C-VS-0309-F250_INST_4-07
3
Remove lower trim panel
Remove plugs on optional brake
control switch. (If necessary)
Remove brake control switch from
lower trim panel. This will reinstall
into console. (Equipment bracket
sold separately)
Remove two hex screws on each
side of cup holder bracket
Remove (2) screws on lower side
of lower trim panel. The insert
this screw attaches to will be
removed. See later instruction.
Remove (2) hex screw as shown
above. Notice location.
Current view of installation
Attach upper portion of con
sole to
dash using screws that held top of
lower trim panel
Remove optional auxiliary
switches from trim panel