Havis-Shields C-VS-1800-ECO Automobile Accessories User Manual


  Open as PDF
of 3
 
C-VS-1800-ECO_INST_9-07
3. Remove mount brackets from console housing and attach to engine cover with
¼” x 1 ¼” hex head bolts, stop nuts and fender washers.
4. Mark and drill four 5/32” diameter holes and attach floor mount plate with
# 10 x 1” sheet metal screws. Also add two ¼” x ¾” carriage bolts facing up.
5. Mount and wire desired equipment into console.
 previous