Havis-Shields C-TCB-32 Automobile Accessories User Manual


  Open as PDF
of 2
 
C-TCB-32_INST_9-07
2
INSTALLATION:
1. MOUNT TO VEHICLE:
• Lean seat back and slide Pole Support Assembly under seat base on inner seat base
bolt on passenger side seat.
• Slide Side Arm Brace under outer seat base bolt on passenger side seat.
• Attach Side Arm Brace to Pole Support Assembly using 5/16-18 x 1” Hex Head Bolt,
Nylock nut, and flat washers.
• Replace front seat bolts on passenger side Seat and tighten.
• In remaining holes in Pole Support Assembly, pre-drill (5/32”) and attach using ¼” x
¾” Hex Head Lag bolts.
• Install laptop computer or docking station mount to TCB.
 previous