Filter
Top Products
Equipment Brackets
and Filler Plates
Console Accessories Trak-Mounts Computer Mounts Radio Trays
C-VS-1800-SAV
18" Vehicle Specific Console for ‘02 - 08 Chevy Savanna Van Model
Easy to install
No permanent modification required
Vehicle mounting kit included
16 gauge formed steel housing with extruded aluminum top frame
Includes filler plates (FP) and/or equipment brackets (EB) to completely
enclose mounting area less internal mount options
See pages C20-28 for control head equipment brackets
Measurements:
Height = 19"
Width at Engine Cover = 17"
Width at Face (controls) = 13.5"
Depth for controls top = 9" middle = 12" bottom = 4"
Console Top Platform = 8.5" x 13.5" wide (tapers out to 17")
Extends out from Engine cover at floor = 20"
55° Angle
Ships motor freight when ordering 2 or more
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
18" 28 lbs.
20" Console for 2006-2008 Dodge Charger and 2005-2007 Magnum
Replaces factory OEM console without permanent modification
8" high x 9" wide x 20" long
8" L equipment bracket space-front model (C-SM-830), 12" L equipment
bracket space-rear model (C-SM-1200). See Stout Mount section on page
C2 for console dimensions (C-SM-830 and C-SM-1200)
Reduces height between seats
Designed to accept SM Series computer mount options and most standard
accessories such as armrests (C-AP accessory pocket does not fit)
Includes filler plates (FP) and/or equipment brackets (EB) to completely
enclose mounting area less internal mount options
See console appendix (page C82) for mounting depth allowed for control
heads and/or options
•
•
•
•
•
•
•
C-VS-0812-CHGR
Consoles
VEHICLE SPECIFIC CONSOLES (VS SERIES)
By: Havis-Shields
Part Number Weight
18" Vehicle Specific Console for ‘04-’08 Ford Econoline Van Model E-250/E-350
Easy to install
No permanent modification required
Designed to mount to vehicle floor surface
No vehicle mounting kit required
14 gauge formed steel housing with extruded aluminum top frame
Includes filler plates (FP) and/or equipment brackets (EB) to completely enclose mounting
area less internal mount options
See pgs C20-28 for control head equipment brackets
Measurements:
Height = 19"
Width at Engine Cover = 17"
Width at Face (controls) = 13.5"
Depth for controls top = 9" middle = 12" bottom = 4"
Console Top Platform = 8.5" x 13.5" wide (tapers out to 17")
Extends out from Engine cover at floor = 20"
55° Angle
Ships motor freight when ordering 2 or more
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C-VS-1800-ECO
18" 28 lbs.
20" 14 lbs.
Maximum Equipment
Mounting Area
C18
Contact us at:
Ph: 800.524.9900 or 215.957.0720 Fax: 215.957.0729
E-mail: sales@havis.com Web: www.havis.com