Filter
Top Products
Power connections
TC600
The TC600 requires two individual wires
Your
TC
Series amplifier requires a positive
12V
Positive
(B+)
connection
connected to the two battery
(+)
terminals
12V
battery connection and a negative
12V
Remember-: Connecting your. amplifier to
on the amplifier. Make sure you route these
ground. Use 10-gauge or larger wire for
the positi,te terminal of your battery is the leads separately from the preamp output
these connections.
last thing you do, afrer all other- connections
cables to avoid the possibility of noise in
in your system have been conzpleted.
the system. There are two methods you can
use to complete this connection:
er
connections
I
SIGNAL INPUT SPEAKER OUTPUT