Harbor Freight Tools 97071 Motorcycle Accessories User Manual


 
Page 2SKU 97071 For technical questions, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number
in the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
WARNING! Read all instructions
Failure to follow all instructions listed below may result in serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
Keep children and bystanders away while operating. Distractions can
cause you to lose control.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
PERSONAL SAFETY
Wear ANSI-approved safety goggles, NIOSH-approved dust mask/respira-
tor, and heavy-duty work gloves during installation.
Stay alert and use common sense when operating. Do not use when tired or
under the inuence of drugs, alcohol or medication.
Do not overreach. Keep proper footing and balance at all times. This enables
better control in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
PRODUCT USE AND CARE
This product is not a toy. Keep it out of reach of children.
Use the correct product for your application. Make sure your motorcycle’s wheel
ts in the Motorcycle Stand. Do not modify this product or use it for a purpose for
which it is not intended.
Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the product’s operation. If damaged, have the
product repaired before use.
1.
2.
1.
2.
3.
4.
1.
2.
3.