Harbor Freight Tools 96500 Automobile Parts User Manual


 
Page 7SKU 96500
For technical questions, please call 1-800-444-3353.
OPERATION
Controls and Indicators
Oil Plug (30)
Oil Dipstick
(36)
Drain Plug (1)
Muffler (88)
Engine Switch (97)
Throttle
Choke
Fuel Valve
Drive Shaft
Fuel Tank (87)
Air Cleaner (75)
Drain Plug (1)
Spark Plug (25)
Recoil Starter (95)
Deposit Cup
Muffler (88)
Oil Plug (30)
Pre-Operation Checks
Caution: Failure to add oil to the Engine before first use will damage the Engine and
void the factory warranty. Engine oil is the key factor in engine performance. Do not
use Engine oil with additives. Do not use two-stroke gasoline-oil. Using these products
will shorten Engine life. See Specifications on page 3 for recommended oil type.
Check that all mounting nuts and bolts are tight.
Check oil level (See illustration below, left.) If needed, add oil. Unscrew the oil Dip
Stick (36) and wipe clean. Insert the Dip Stick back into the hole without screwing it
in. Remove it again and check the oil level. Full is indicated by oil on the Upper Level
1.
2.