Filter
Top Products
Page 3
SKU 90892
9. Maintain tools with care. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool periodically, and if
damaged, have it repaired by an authorized technician.
10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when
you are tired.
11. Check for damaged parts. Before using any tool, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment and binding of moving parts; any broken parts or mounting
fixtures; and any other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician. Do not use these Jack
Stands if either the Handle (6), or the Ratchet Bar (2) are not moving and locking in place
properly.
12. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
13. Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with these tools. Approved accessories are available from Harbor Freight Tools.
14. Do not operate tool if under the influence of alcohol or drugs. Read warning labels
on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
If there is any doubt, do not operate the tool.
15. Maintenance. For your safety, maintenance should be performed regularly by a qualified
technician.
16. Jack Stands’ capacity. Never exceed the Jack Stands’ combined capacity of 110 Lbs.
This capacity is with the weight evenly distributed across both Jack Stands. Check the
owner’s manual of the item to be supported to determine the actual gross weight of the
item before attempting to support it. These small Jack Stands have a limited weight
capacity; never attempt to use these Jack Stands for a purpose for which they are
not designed for. Always center the load evenly across both stands.
17. Never stand on the Jack Stands. Never stand on the Jack Stands, and never attempt
to support people or pets.
Warning!! Stand clear of the Jack Stands when they are being removed or put into position.
Caution: Always be aware of Dynamic Loading. If you drop a weight on the Ratchet Bar
(2) it may create for a brief instant, an excess load, which could result in damage to the
Jack Stands, tipping over of the Jack Stands, and/or personal injury.
The warnings, cautions, and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be
supplied by the operator.
Unpacking
When unpacking, check to make sure that all of the Jacks’ parts are included. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.
90892 Miniature Jack Stand manual.p65 10/22/03, 3:19 PM3