Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. Item 69623
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Assembly Diagram on page 7.
Assembly
Note: Only finger tighten bolts until
Carrier is fully assembled.
1. Align the mounting holes on the
ends of the Right Frame (2) and Left
Frame (3) with the mounting holes
along the sides of the Post (1).
2. Fasten the Frames to the Post using the
Bolts (10), Washers (11), and Nuts (12).
3. Set the Cross Braces (6) over the
Frames (2,3) and fasten the Cross
Braces to the Frames using the Bolts
(7), Washers (8), and Lock Nuts (9).
4. Use a wrench (not included) to
tighten all bolts securely.
Functions
Figure A: Components
Post
Hitch Pin
R-Pin
Carrier