Filter
Top Products
Page 10 For technical questions, please call 1-888-866-5797. Item 60431
SAFETY OPERATION MAINTENANCESPECIFICATIONS
Maintenance Instructions
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY: Unplug the charger, disconnect any battery, and allow charger
to cool completely before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the charger. Check for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring or cable insulation, and
• any other condition that may
affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3.
WARNING! If the supply cord of this
charger is damaged, it must be replaced
only by a qualified service technician.
DO NOT OPEN CHARGER HOUSING,
NO USER-SERVICEABLE PARTS INSIDE.