Filter
Top Products
Page 3
SKU 40105
instructions for lubricating and changing accessories. Inspect tool periodically, and
if damaged, have it repaired by an authorized technician. The handle must be kept
clean, dry, and free from oil and grease at all times.
10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
11. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if the handle and pedal do not operate properly.
12. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
14. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
15. Maintenance. For your safety, maintenance should be performed regularly by a
qualified technician.
16. Jack Capacity. Never exceed the Jack’s capacity of 3000 Lbs. Check the vehicle’s
owner’s manual to determine the actual gross weight of your vehicle before attempting
to lift it.
17. Never ride on the Jack. Never ride on the Jack, and never have people or pets in the
vehicle you are raising.
18. Only use Jack to raise vehicle. After raising the vehicle, use jack stands to keep the
vehicle suspended for periods of time. Do not work on the vehicle while it is up on the
Jack. The Jack is designed for lifting the vehicle only.
19. Do not move the vehicle while it is on the Jack.
20. Do not make any alterations or modifications to this Jack.
Warning!! Stand clear of the Jack when raising or lowering a vehicle.
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
REV 08i