Filter
Top Products
SKU 39224 Page 3
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles
when working on gasoline engines. Be sure to work in a well ventilated place, or
pipe exhaust gasses to the outdoors. Carbon Monoxide Warning: Guard
against exposure to Carbon Monoxide, which is an odorless, colorless gas
produced by gasoline engines. Carbon Monoxide exposure may cause
serious injury or death.
8. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
9. Maintain tools with care. Keep tester threads sharp and clean for better and
safer performance. Follow instructions for lubricating and changing accessories.
The gauge hose and adapters must be kept clean, dry, and free from oil and
grease at all times.
10. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
11. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the tester if it leaks or the pressure
release valve does not function properly.
12. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty.
13. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
14. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
15. WARNING: Wear protective gloves and ANSI approved eye protection when
working on a hot engine. Keep hands away from the fan and other moving parts,
and protect yourself from electrical shock or burns. Be aware that working on a
gasoline engine is inherently dangerous, and suitable precautions must be taken.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.