Filter
Top Products
Bag
Clamp
Long Foam
Strip
Collection
Bag
Flange
Screws
Collector
Body
Canister
Filter
Figure 7. T10877 final assembly on dust
collector.
8. Attach canister filter to flange with (6)
1
⁄4"-20 x
3
⁄4" flange screws (see Figure 7).
9. Attach long foam strip to groove around bot-
tom of canister filter (see Figure 7).
10. Place collection bag over bottom of canister
filter and secure with bag clamp, making sure
clamp is seated in groove over foam strip
(see Figure 7).
7. Install (2)
5
⁄16"-18 x 2" hex bolts, (4)
5
⁄16" flat
washers, and (2)
5
⁄16"-18 hex nuts into con-
nection collar, then tighten, making sure
ridges in collar mate with ridges in flange and
collector body outlet (see Figure 6).
Note: Tug flange by hand to make sure it is
secure before proceeding.
Figure 6. Connection collar secured firmly in
place around collection flange and outlet.