Filter
Top Products
MODEL
G8721/G8722
ENGINE STANDS
INSTRUCTION SHEET
To reduce the risk of property damage,
serious personal injury, or death when
using this engine stand, take the following
precautions:
Refer to your vehicle service manual to
locate the safe engine lifting/support
locations, and to verify that the engine
weight does not exceed the maximum
engine stand load rating.
Never attempt to start or run an engine
on this engine stand.
• Only use this engine stand on a hard
level surface capable of sustaining the
combined load.
• Always mount all four mounting arms at
the appropriate points on the engine.
• All mounting arms must be bolted
tightly against the engine with at least
5/8" thread penetration into the engine.
• Never use an impact tool to tighten the
mounting arm bolts into the engine.
Tighten all bolts manually.
• Before removing the lock pin to rotate
the engine, fully support the engine so
the engine will not uncontrollably rotate
when the pin is removed.
Never modify this engine stand.
• Never allow children to play with or
near the engine stand while in use or in
storage.
• Avoid moving the engine and stand
across a floor where a wheel may fall
into a hole or crack and cause the unit
to tip and fall.
• Never work under a supported engine.
• Never roll the stand without the lock pin
installed.
• Periodically inspect the stand bolts,
framework, wheels, and welds for
looseness, cracks, or other damage.
Specifications
Model: G8721 Engine Stand
Model: G8722 Engine Stand
Model G8721 Assembly
Note: Refer to Figure 2 for reference.
1.
2.
3.
4.
5.
Model G8722 Assembly
Note: Refer to Figure 2 for reference.
1.
2.
3.