Grizzly G8721/G8722 Automobile Parts User Manual


 
MODEL
G8721/G8722
ENGINE STANDS
INSTRUCTION SHEET
To reduce the risk of property damage,
serious personal injury, or death when
using this engine stand, take the following
precautions:
Refer to your vehicle service manual to
locate the safe engine lifting/support
locations, and to verify that the engine
weight does not exceed the maximum
engine stand load rating.
Never attempt to start or run an engine
on this engine stand.
Only use this engine stand on a hard
level surface capable of sustaining the
combined load.
Always mount all four mounting arms at
the appropriate points on the engine.
All mounting arms must be bolted
tightly against the engine with at least
5/8" thread penetration into the engine.
Never use an impact tool to tighten the
mounting arm bolts into the engine.
Tighten all bolts manually.
Before removing the lock pin to rotate
the engine, fully support the engine so
the engine will not uncontrollably rotate
when the pin is removed.
 Never modify this engine stand.
Never allow children to play with or
near the engine stand while in use or in
storage.
Avoid moving the engine and stand
across a floor where a wheel may fall
into a hole or crack and cause the unit
to tip and fall.
Never work under a supported engine.
Never roll the stand without the lock pin
installed.
Periodically inspect the stand bolts,
framework, wheels, and welds for
looseness, cracks, or other damage.
Specifications
Model: G8721 Engine Stand




Model: G8722 Engine Stand



Model G8721 Assembly
Note: Refer to Figure 2 for reference.
1.         
    

2. 
       

3.        

4.

5. 


Model G8722 Assembly
Note: Refer to Figure 2 for reference.
1.         
  

2. 

3.    
