Filter
Top Products
Instructions
Hydraulic Fluid
Controls
308395D
EN
Regulates hydraulic pressure and flow when used with Graco’s Dyna-Star
™
and
Power-Star
™
hydraulic-powered lubricant pumps. For professional use only.
Model 236864
Used with Dyna-Star
™
1500 psi (10.5 MPa, 105 bar) Maximum Working Pres-
sure
3 gpm (11 liters/min) Maximum Flow Rate
Model 236865
Used with Power-Star
™
1500 psi (10.5 MPa, 150 bar) Maximum Working Pres-
sure
12 gpm (45 liters/min) Maximum Flow Rate
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
Hydraulic fluid controls are designed to control
hydraulic fluids only in a hydraulic power system. Any
other fluids can cause unsafe operating conditions
and results in component rupture, fire, or explosion
which could result in serious injury, including fluid
injection.
Model 236865
Model 236864