Filter
Top Products
1-9
To return the seatback to the upright position, push the
seatback all the way back until the latch catches. If the
seatback was reclined before being folded forward, it
will return to the reclined position.
CAUTION:
If the seatback isn’t locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.
Easy Entry Seat (If Equipped)
The right front bucket or split-bench seat on some
models makes it easy to get in and out of the rear
vehicle area.
1. Tilt the right front seatback completely forward and
the whole seat will slide forward.
2. Return the seatback to its original position after
someone gets into the rear seat area. Then move the
seat rearward until it locks.
CAUTION:
If an easy entry right front seat isn’t locked, it
can move. In a sudden stop or crash, the person
sitting there could be injured. After you’ve used
it, be sure to push rearward on an easy entry seat
to be sure it is locked.
Tilt the seatback and slide the seat completely forward
again to get out of the rear vehicle area.