Filter
Top Products
Battery Replacement
To change the batteries, do the following:
1. Remove the battery compartment door located on
the bottom of the remote control.
2. Replace the two AA batteries in the compartment.
Make sure that they are installed correctly, using
the diagram on the inside of the battery
compartment.
3. Close the battery door securely.
If the remote control is to be stored for a long period of
time, remove the batteries and keep them in a cool,
dry place.
Problem Recommended Action
No power. The ignition might not be
in on or accessory.
The parental control
button might have been
turned on. The power
indicator light will flash.
Disc will not play. The system might be off.
The parental control
button might have been
turned on. The power
indicator light will flash.
The system might be in
auxiliary mode.
The disc is upside down
or is not compatible.
The picture does not
fill the screen. There
are black borders on
the top and bottom or
on both sides or it looks
stretched out.
Check the display mode
settings in the
display menu.
The disc was ejected,
but it was pulled back
into the DVD player.
The disc is being stored in
the DVD player. Press the
eject button again to eject
the disc.
3-121