Filter
Top Products
2-89
The DIC is used to program the personal choices of
two drivers. The drivers are recognized as DRIVER 1
and DRIVER 2. You will let the DIC and the vehicle
know which driver you are by using your remote keyless
entry transmitter or by pressing the appropriate memory
seat button located on the driver’s door or choosing
the driver with the DIC. Each remote keyless entry
transmitter was pre
-programmed to belong to
DRIVER 1 or DRIVER 2. The personalization
features may be programmed differently for each driver.
When you press the unlock symbol on the transmitter,
the DIC will automatically change driver numbers
and the vehicle will recall the personal choice settings
that were last made to correspond to your transmitter,
including your radio and comfort control settings.
See “Comfort Controls, Personalization” in the Index.
If you unlock the vehicle using the door key instead
of the transmitter, the personal choice settings will
correspond to the previous driver of the vehicle as
identified by the transmitter, the memory seat control
or the DIC. If this happens and you were not the last
driver of the vehicle, press the correct driver number
on the door panel for the memory seats, press the
unlock symbol on the transmitter or select the
personalization programming mode and choose
the correct driver number.
After you have the correct driver number on the display
use the SELECT down arrow button to scroll through
the following messages and feature options:
DOORS LOCK IN GEAR
-- YES/NO
DOORS UNLOCK
-- YES/NO
ALL DOORS IN PARK
-- YES/NO
ALL DOORS AT KEY OFF
-- YES/NO
DRIVERS DOOR IN PARK
-- YES/NO
DRIVERS DOOR KEY OFF
-- YES/NO
PASS WINDOW LOCKOUT
-- YES/NO
KEY FOB FLASH LIGHTS
-- YES/NO
KEY FOB CHIRP HORN
-- YES/NO
DELAY LOCK OF DOORS
-- YES/NO
PERIMETER LIGHTS -- YES/NO
EXT LIGHT TIMEOUT
-- 5 to 30 Seconds
DISPLAY DRIVER ID -- YES/NO
KEY FOB MEMORY SEAT
-- YES/NO
DRIVING POSITION
-- YES
EXIT POSITION -- YES
TILT MIRROR REVERSE
-- YES/NO