ITEM PART NO. DESCRIPTION QTY
6A008 0D34540108 DOWEL, HEAD TO BLOCK 4
6010 0H09230149 BARE BLOCK 1
6026 0F7316B111 PLUG, 1.75SS, CUP, 4 LEFT, 4 RIGHT,2REAR 10
6026 0H09230164 PLUG, 13.84MM, CUP, FRONT 2
6026 0D34540103 PLUG, 3/8-18X.425 SOCKET HEAD 2
6026 0E96180118 PLUG, 38.3MM, CUP, SS, 1 FRONT, 1 REAR 2
6345 0F19600111 BOLT, MAIN CAP, M10X1.5X94.5, HEX HEAD*** 11
6345 0F19600113 STUD BOLT, M8X1.25XM10X1.5X126*** 1
6345 0F1960A176 BOLT, MAIN CAP, M9X1.25X53 HEX HEAD*** 12
6A346 0D34540145 DOWEL, MAIN CAP 12
8555 0H09230166 TUBE, WATER, FOR HEATER 1
18663 0H09230137 TUBE, WATER 1
6397 0F97650111 PIN, DOWEL, TO TIMING CVR.,8.0X45.5 (HM2) 2
NOT SHOWN 0H09230201 NUT, M12 4
NOT SHOWN 0H09230202 BOLT, MOUNT TO BLOCK,M10X1.5X28.5 4
NOT SHOWN 0H09230191 BOLT, MOUNT TO BLOCK,M10X1.5X70 4
HM1 0H09230193 PIN, DOWEL, TO TIMING CHAIN GUIDES 2
HB1 0H09230198 SCREW, KNOCK SENSOR, M8X30MM 1
*** DO NOT RE USE MAIN BEARING CAP BOLTS
5
6.8L Gas Engine Cylinder Block
Note: The right and left banks of engine are determined by viewing the engine from the flywheel side.